When is a violation of the DPC watchdog considered to have occurred? Many users may be perplexed and unsure of what the problem means if they have encountered it. Deferred Procedure Call is an abbreviation for “delayed procedure call.” Watchdog is a bug detector that keeps tabs on the state of your windows applications and computer.
Instances of the dreaded “blue screen of death” caused by a DPC watchdog violation are not always obvious. And the dreaded blue screen of death could appear multiple times daily. If this mistake occurs regularly at the workplace, it will undoubtedly affect productivity. So, the best course of action is to eliminate the root causes.
What Causes the DPC Watchdog Violation
- The failure to update or repair device drivers is a typical cause of the DPC Watchdog Violation error in Windows 10. In this case, you may require to either manually update the drivers or employ a third-party program to do so automatically.
- It’s possible that the DPC Watchdog error message will appear after you install a new piece of hardware onto an older machine.
- The software you are trying to install on your device may be incompatible with the software on your computer. One common cause of the DPC Watchdog error issue is the simultaneous use of two antivirus products.
- The hardware you are trying to connect to your device may not be supported if it requires an incompatible version of firmware or drivers. You should always use the most recent firmware version of any SSD you install on a computer.
There will be no successful Windows boot if the files are corrupted or damaged.
#1. How to Fix DPC Watchdog Violation Error
Step 1. Power down your computer and disconnect any peripherals you’re not using, such as external hard drives, scanners, printers, smartphones, digital cameras, etc. If the issue disappears after taking these steps, you can rule out any other hardware as the culprit. After that, you can start plugging everything back in to find out what went wrong. If that’s the case, have them try reinstalling the drivers for their devices, switching to a new USB port, or even formatting the device itself.
#2. Delete recently installed software
New software installation on a computer may result in a DPC Watchdog Violation. It’s best to delete any software that is generating problems since sometimes updating software or updating apps might cause PC errors.
It occurs when users install two antivirus programs on the same computer. Tech experts generally advise that one antivirus program is sufficient to shield your computer from deadly infections. Every antivirus has a unique algorithm, therefore using two different programs to do the same task can lead to confusion. Therefore, if your computer has two antivirus programs installed, you can uninstall one of them.
#3. Fix System Files by scanning
If you haven’t scanned your computer in a while, now is the time to do so because damaged or corrupted files might cause DPC Wachdog voilation errors. Using this approach, you may examine which Windows system files are functioning properly by scanning them.
Step 1. Run CMD as Admin
You can enter “CMD” in the Windows searching box then right-click to run it as an administrator.
Step 2. You need to Run SFC Check
Enter “sfc/scannow” and press enter then you need to wait for a few minutes until it completes scanning.
If the CMD system discovers a damaged file, it will automatically begin to repair it. If not, you can shut the window and restart your computer to make adjustments.
#4. Install a new disk
If it doesn’t work, the faulty hardware will have to be removed, as the issue may be irreparable. If you suspect that your primary boot drive is at fault, you can install a new disk or temporarily switch to using a backup disk to boot the system. If that disk is your primary boot device, you should replace it with a new start drive running Windows 11.
#5. Reset Factory Settings
Windows 11 includes a reset to factory settings option for when all else fails. However, this will altogether remove your profile, so save any essential data before proceeding. Even if you don’t think your most important data will ever be lost, it’s still a great idea to store multiple copies of it somewhere safe, just in case.
#6. Check whether SSD is working or not
To resolve driver issues with your storage devices, Windows Chkdsk should be run. Any SSD problems that may be triggering the DPC Watchdog error can be corrected by running this procedure.
#7. Updating the SATA AHCI driver
It may be possible to resolve the issue by updating the SATA AHCI driver. You may access the standard AHCI SATA controller by pressing the Windows key + X to open the Device Manager, then click on Disk drives. Select Properties from the context menu that appears when you tap and hold or right-click. Go to Driver Details, then Update Driver. Choose this option to find drivers automatically and follow the on-screen prompts.
#8. Firmware update
Whether you think your solid-state drive is malfunctioning, check the manufacturer’s website to determine whether there is an available firmware update. These are typically posted on some help website.
How to Avoid the DPC Watchdog Violation Error
Avoiding an issue entirely rather than trying to fix it later is always preferable. It’s a pain to stop what you’re doing and go through all of these motions, especially if you’re in the center of an essential task.
However, you can take precautions against this issue that are easier to predict, such as making sure the software and hardware you buy are suitable for your PC before using it for a lengthy period.
As you can see, rectifying a DPC Watchdog Violation is not a particularly difficult task. Applying the steps above will immediately resolve the DPC Watchdog Violation issue. I am hoping this information will assist in determining the Watchdog problem.
